Advantageous Interfacial Effects of AgPd/g-C3N4 for Photocatalytic Hydrogen Evolution: Electronic Structure and H2O Dissociation

Bimetallic AgPd nanoparticles have been synthesized before, but the interfacial electronic effects of AgPd on the photocatalytic performance have been investigated less. In this work, the results of hydrogen evolution suggest that the bimetallic AgPd/g-C₃N₄ sample has superior activity to Ag/g-C₃N₄ and Pd/g-C₃N₄ photocatalysts. The UV/Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, CO adsorption diffuse reflectance FTIR spectroscopy, and FTIR results demonstrate that in the AgPd/g-C₃N₄, the surface electronic structures of Pd and Ag are changed, which is beneficial for faster photogenerated electron transfer and greater H₂O molecule adsorption. In situ ESR spectra suggest that, under visible light irradiation, there is more H₂O dissociation to radical species on the AgPd/g-C₃N₄ photocatalyst. Furthermore, DFT calculations confirm the interfacial electronic effects of AgPd/g-C₃N₄, that is, Pd^δ−⋅⋅⋅Ag^δ+, and the activation energy of H₂O molecule dissociation on AgPd/g-C₃N₄ is the lowest, which is the main contributor to the enhanced photocatalytic H₂ evolution.     

Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites

The structural-phase state of the contact zone and the factors that influence on the strength of diamond retention in the diamond carbide composites were determined. Composites were obtained by the new hybrid technology that eliminates the reheating of the metalized coating. The elaborated technology combines the thermal diffusion metallization of a diamond and the sintering by the scheme of self-dosed impregnation in a one-stage technological cycle. By the methods of electron microscopy, X-ray diffraction analysis, and Raman spectroscopy the structural and phase characteristics of the interphase boundary were investigated. The improvement of chemical and mechanical adhesion between the diamond and carbide matrix was obtained. It was shown that the specific productivity of the samples with a metalized diamond component is 39% higher than those without metallization.     

基于内聚力模型的快速荷载下CFRP-混凝土界面剪切剥离模拟

鉴于纤维增强复合材料(Fiber Reinforced Polymer, FRP)已在混凝土结构加固中普遍应用, 能有效提高结构的承载和变形能力. 为揭示动载作用下FRP-混凝土界面的剥离机理, 本文基于ABAQUS平台, 采用内聚力模型模拟CFRP-混凝土界面层, 实现了快速荷载下CFRP-混凝土界面剥离的高效模拟. 结果表明: CFRP表面应变在加载过程中由加载端向自由端方向传递, 随着加载速率的提高, 界面承载能力也随之提高; 界面峰值剪应力也存在显著的应变率效应; 模拟结果与试验结果基本吻合, 说明了新方法的有效性.     

One-step measurements of powder resistivity as a function of relative humidity and its effect on charging

A new one-step technique to measure the effect of ambient humidity on powder resistivity has been previously presented. In this article, we provide more experimental data obtained with five different powders. One-step measurements and traditional multi-step measurements were performed. Also, additional measurements were performed using standard resistivity cell. Results were compared and it could be concluded that the new technique provided meaningful results although significant hysteresis was observed during humidification and drying cycles. Finally, charging of the powder was also measured and it was noticed that it decreases with decreasing resistivity and increasing humidity.     

A control volume finite element method for three-dimensional three-phase flows

A novel control volume finite element method with adaptive anisotropic unstructured meshes is presented for three-dimensional three-phase flows with interfacial tension. The numerical framework consists of a mixed control volume and finite element formulation with a new P₁DG-P₂ elements (linear discontinuous velocity between elements and quadratic continuous pressure between elements). A “volume of fluid” type method is used for the interface capturing, which is based on compressive control volume advection and second-order finite element methods. A force-balanced continuum surface force model is employed for the interfacial tension on unstructured meshes. The interfacial tension coefficient decomposition method is also used to deal with interfacial tension pairings between different phases. Numerical examples of benchmark tests and the dynamics of three-dimensional three-phase rising bubble, and droplet impact are presented. The results are compared with the analytical solutions and previously published experimental data, demonstrating the capability of the present method.     

纤维复合材料界面横向拉伸分析

以单纤维十字型横向拉伸试验为研究对象,对纤维/基体界面采用弹性-软化双线性内聚力模型,建立了纤维复合材料在横向拉伸作用下界面法向失效过程的解析模型。得到了沿纤维/基体圆周界面的法向应力分布,纤维/基体界面的状态与界面承载力和单纤维复合材料承载力的关系,以及内聚力参数和试件几何尺寸对它们的影响。结果表明:纤维/基体圆周界面在脱粘前经历全部弹性及弹性+软化两种状态;当界面为弹性状态时,界面法向应力随界面强度线性增加;当界面为弹性+软化状态时,界面软化范围随界面裂纹萌生位移的增加而增大;界面初始脱粘位置与拉伸荷载方向重合;界面初始脱粘时的界面承载力随界面强度及界面裂纹萌生位移的增加而增加,随界面裂纹生成位移的增加而降低;单纤维复合材料的脱粘荷载受基体截面尺寸的影响,当纤维体积含量相同时,沿荷载方向截面尺寸的增大对提高脱粘荷载更显著。     

Hexagonal La2O3 Nanocrystals Chemically Coupled with Nitrogen-Doped Porous Carbon as Efficient Catalysts for the Oxygen Reduction Reaction

The construction of nano-scale hybrid materials with a smart interfacial structure, established by using rare earth oxides and carbon as building blocks, is essential for the development of economical and efficient catalysts for oxygen reduction reactions (ORRs). In this work, hexagonal La₂O₃ nanocrystals on a nitrogen-doped porous carbon (NPC) derived from crop radish, served as building bricks, are prepared by chemical precipitation and then calcination at elevated temperatures. The obtained La₂O₃/NPC hybrid exhibits a very high ORR activity with a half-wave potential of 0.90 V, exceeding that of commercial Pt/C (0.83 V). Both DFT theoretical and experimental results have verified that the significantly enhanced catalytic performance is ascribed to the formation of the C−O−La covalent bonds between carbon and La₂O₃. Through the covalent bonds, electrons can transfer from the carbon to La₂O₃ and occupy the unfilled e_g orbital of the La₂O₃ phase. This results in the accelerated adsorption of active oxygen and the facilitated desorption of the surface hydroxides (OH_ad⁻), thereby promoting the ORR over the catalyst.     

Study on the Relationship between Emulsion Properties and Interfacial Rheology of Sugar Beet Pectin Modified by Different Enzymes

The contribution of rheological properties and viscoelasticity of the interfacial adsorbed layer to the emulsification mechanism of enzymatic modified sugar beet pectin (SBP) was studied. The component content of each enzymatic modified pectin was lower than that of untreated SBP. Protein and ferulic acid decreased from 5.52% and 1.08% to 0.54% and 0.13%, respectively, resulting in a decrease in thermal stability, apparent viscosity, and molecular weight (Mw). The dynamic interfacial rheological properties showed that the interfacial pressure and modulus (E) decreased significantly with the decrease of functional groups (especially proteins), which also led to the bimodal distribution of particle size. These results indicated that the superior emulsification property of SBP is mainly determined by proteins, followed by ferulic acid, and the existence of other functional groups also promotes the emulsification property of SBP.     

Hole/Electron Transporting Materials for Nonfullerene Organic Solar Cells

Nonfullerene acceptor based organic solar cells (NF-OSCs) have witnessed rapid progress over the past few years owing to the intensive research efforts on novel electron donor and nonfullerene acceptor (NFA) materials, interfacial engineering, and device processing techniques. Interfacial layers including electron transporting layers (ETL) and hole transporting layers (HTLs) are crucially important in the OSCs for facilitating electron and hole extraction from the photoactive blend to the respective electrodes. In this review, the lates progress in both ETLs and HTLs for the currently prevailing NF-OSCs are discussed, in which the ETLs are summarized from the categories of metal oxides, metal chelates, non-conjugated electrolytes and conjugated electrolytes, and the HTLs are summarized from the categories of inorganic and organic materials. In addition, some bifunctional interlayer materials served as both ETLs and HTLs are also introduced. Finally, the prospects of ETL/HTL materials for NF-OSCs are provided.     

原子层沉积构筑Pd/TiO2限域催化剂及其在1,4-丁炔二醇加氢的应用

利用ALD制备了TiO₂限域的Pd催化剂, 研究了限域空间内Pd纳米颗粒与TiO₂的界面作用对1,4-丁炔二醇(BYD)加氢性能的影响. 相比于管外负载型催化剂, 限域催化剂在催化1,4-丁炔二醇选择性加氢反应中体现出非常高的催化活性和1,4-丁烯二醇的选择性. HR-TEM、 EDX-Mapping、 XRD、 XPS和H₂-TPR表征说明, 限域体系中Pd-TiO₂的界面相互作用强于传统TiO₂表面负载型Pd催化剂, 这种强界面作用不仅能够提高BYD的加氢活性, 也可抑制半加氢产物1,4-丁烯二醇的异构化和深度加氢, 提高1,4-丁烯二醇的选择性, 而且限域结构也可阻止管内壁Pd纳米颗粒的脱落, 提高催化剂的稳定性.